Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Replacing the front bezel

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Grille
Operation: Replacing the front bezel

The disassembly of the front cover is very simple and easy. The grille is held in place by four simple side latches. Using the special tool, pry between the retaining spring of the hooks and the body in order to release the retainer. Carry out the same operation on the remaining three hooks. Now you can remove the bezel from the front. To install the new bezel, simply place it delicately in its compartment and press inwards. The four hooks lock automatically without further intervention. Check the correct position in the holder.


Posted on 15 July 2023 by ScegliAuto



Complete replacement of headlights
Mazda 3 (2003-2009 / BK, MK 1) Improving visibility at night is always recommended, so get the kit necessary for the modification and proceed as follows. Open the bonnet and remove
Replacement of radio and LCD display
Mazda 3 (2003-2009 / BK, MK 1) Using a plastic tool to avoid damaging the body, pry around the display bezel to release the plastic catches in order to access the radio console ret
Engine oil and oil filter replacement
Mazda 3 (2003-2009 / BK, MK 1) Open the front hood and unscrew the oil filler cap (this will help drain); lift the car on suitable car stands making sure it is level; unscrew the o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos