Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Mazda 3

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Today, you will learn how to replace the front headlamp bulb on a Mazda 3. To replace the bulb, open the front bonnet of the vehicle and disconnect the connector from the bulb, then remove and replace it. Insert the new bulb and reconnect it to the connector.

Finish by testing the bulb and headlamp operation by turning on the lights.

If the light does not illuminate, check and, if necessary, replace the fuse for the right front headlamp as shown in the instructional video. To replace the left headlamp bulb, follow the same steps.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the 2022 Mazda 3
How to Replace the Front Headlight Bulb on the 2022 Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) The steps to replace the front headlight bulb on the 2022 Mazda 3 are: - open the bonnet by pulling the lever under the steering wheel; - disconnect …
Replacing the Headlight Bulb of the Mazda 3
Replacing the Headlight Bulb of the Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) The instructions in this guide will allow you to remove and replace the dipped beam bulb of the front headlight of the Mazda 3. First, open the bonne…
How to Remove the Fog Light from the Mazda 3 Bumper
How to Remove the Fog Light from the Mazda 3 Bumper
Mazda 3 (2009-2013 / BL, MK 2) How do you remove the front fog light from the Mazda 3? Follow these steps to remove the fog light from the Mazda. Lift the car with a jack, then loc…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos