Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Headlight bulb

Mazda 3 - Headlight bulb

Mazda 3 (2003-2009 / BK, MK 1)
Where are the sidelight fuses located in the Mazda 3?
In the event that the sidelights of our Mazda 3 suddenly stop working, and both bulbs are in good condition, it is most likely that it is a fault of the …read all…
Posted on 6 April 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to replace the headlight bulb on Mazda 3
In this new mini guide of ours we are going to explain to you in detail how to replace the bulb in the front light of your Mazda 3 first series (year 2008). …read all…
Posted on 27 November 2022 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to replace the headlight bulbs on a Mazda 3
Let's see how to replace the headlight bulbs of a Mazda 3 with LED bulbs: open the front hood (by pulling the lever located at the bottom right of the …read all…
Posted on 9 November 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to replace the Mazda 3 headlight bulb
Replacing the headlight bulb on this car model is quite simple to do since there is enough room for maneuver to do this; start by removing the plastic cover …read all…
Posted on 2 November 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to replace a headlight bulb on Mazda 3
Do you want to change the headlight bulbs of a Mazda 3 but have no idea how to do it? Let's see how to proceed in the demonstration video. We open the bonnet …read all…
Posted on 4 October 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Installing the headlight bulb
Installing the headlight bulb is a fairly simple task to perform. Remove the bolt on the front of the front fender, disconnect the headlight connector and pull …read all…
Posted on 22 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement
In order to replace the bulb it is necessary to remove the headlight and then unhook the front bumper to access the fixing pins: one is located at the lower …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement.
The limited space available for the operation does not make it easy to disassemble the lamp. The first operation consists in removing the protective covers of …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement.
The limited space available for the operation does not make it easy to disassemble the lamp. The first operation consists in releasing the bulb holder holding …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement
To replace the headlight bulb, it is first necessary to remove the plastic covers right above the headlight in order to access the bulb holder. Then unhook the …read all…
Posted on 16 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement
To replace the headlight bulb, first remove the plastic cover between the fuse keypad and the engine cover. At this point, unhook the socket connected to the …read all…
Posted on 14 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Headlight bulb replacement
To be able to replace the headlight bulb, open the hood and remove the triangular-shaped plastic cover located just above the headlight. At this point, unhook …read all…
Posted on 14 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos