Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Mazda 3?

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the front headlight bulbs in the Mazda 3, an extremely simple and quick operation. First of all, make sure the key is not inserted, so that we can work safely, then open the hood, locate the bulb holder located on the back of the headlight in question and, by rotating it slightly counterclockwise, remove it from the housing.

Next, disconnect the old bulb, connect the replacement without touching it directly with bare hands, and reassemble everything following the reverse procedure. Finally, repeat the operation on the opposite side, if necessary.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

How to Replace the Bulbs in the Rear Light of a Mazda 3
How to Replace the Bulbs in the Rear Light of a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Change the blown bulbs inside the boot from which you access the rear light of a Mazda 3. Use a screwdriver to remove the plastic panel covering the …
How to Replace the Reverse Bulbs on a Mazda 3
How to Replace the Reverse Bulbs on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) To replace the reverse bulbs on a Mazda 3, lift the tailgate of the boot and remove the rivets securing the carpet at the back of the tailgate. Once …
How to replace the front turn signal bulb of the Mazda 3.
How to replace the front turn signal bulb of the Mazda 3.
Mazda 3 (2013-2019 / BM, BN, MK 3) Today we will discover the main steps that will allow us to disassemble and replace the front turn signal bulb of the Mazda 3. First, let's move to t…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos