Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Bulbs on a Mazda 3

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Light bulb

To replace the reverse bulbs on a Mazda 3, lift the tailgate of the boot and remove the rivets securing the carpet at the back of the tailgate. Once the carpet is removed, you will have access to the bulbs: to remove them, simply rotate them within their housing and pull them out. Once removed, disconnect them from their respective connector and insert the new bulb into the designated socket. After replacing the bulbs, refit the carpet cover with the corresponding rivets.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Mazda 3
How to Replace the Rear Headlight Bulbs on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Are the rear headlight bulbs blown? Here's how to change them. Open the boot and secure it. Remove the fabric panel covering the headlight (located a…
Replacement of the rear taillight of the Mazda 3
Replacement of the rear taillight of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Today we will discover the instructions that will allow us to disassemble and replace the rear tail light and its bulbs of the Mazda 3. First of all,…
How to Replace the Bulbs in the Rear Light of a Mazda 3
How to Replace the Bulbs in the Rear Light of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Change the blown bulbs inside the boot from which you access the rear light of a Mazda 3. Use a screwdriver to remove the plastic panel covering the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos