Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the headlight bulbs on a Mazda 3

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Headlight bulb
Operation: How to replace the headlight bulbs on a Mazda 3

Let's see how to replace the headlight bulbs of a Mazda 3 with LED bulbs: open the front hood (by pulling the lever located at the bottom right of the dashboard), put it in safety with the rod. We find the inspection cap of the headlight (located at the rear of the headlight) and remove it. Once here, we will find the bulbs with metal hooks; we take out the lamp holders from the lighthouse and we go to extract the bulbs with the help of a screwdriver. We mount the new Led bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We reassemble all the previously disassembled pieces.


Posted on 9 November 2023 by ScegliAuto



How to replace the rear light bulbs on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Are the rear light bulbs gone? Let's see how to change them. Let's open the tailgate, let's put it in safety. We detach the fabric panel that covers
How to replace the rear light bulbs du Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) We change the burnt out bulbs inside the luggage compartment which gives access to the rear light of a Mazda 3. With a screwdriver we remove the plas
How to disassemble the rear light of the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Today we will see, in this video tutorial, how to remove and replace the rear light and its bulbs of the Mazda 3. First we open the tailgate of the t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos