Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Mazda 3?

Model: Mazda 3 MK 4, BP - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Dashboard

See other generations:
Video tutorial

To locate the OBD port inside your Mazda 3, you do not need to remove any components. All you have to do is carefully read the following guide and follow all the steps described.

First, enter the car from the driver's side and then turn off the instrument panel if you have not already done so and then locate the OBD port on the lower left side of the dashboard. After locating it, you can connect a diagnostic tool compatible with your Mazda 3 to it in order to identify any errors in the ECU.


Posted on 6 December 2024 by ScegliAuto


Related tutorials

Where is the OBD Port on the 2015 Mazda 3?
Where is the OBD Port on the 2015 Mazda 3?
Mazda 3 (2013-2019 / BM, BN, MK 3) To locate the OBD port of your 2015 Mazda 3 in a matter of seconds, simply follow these easy steps. Before proceeding, ensure that the car is parked …
How do you program the key of the Mazda 3?
How do you program the key of the Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) To program the key of the Mazda 3, you will need to insert the blank key into the corresponding slot: once the ignition is turned on, you can connect…
How to Fix the Airbag Cable Connector
How to Fix the Airbag Cable Connector
Mazda 3 (2009-2013 / BL, MK 2) First, locate the connectors attached to the cables that need replacing. Take the new connector and open it using a screwdriver. Pry it open and remo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos