Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Mazda 3?

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Key

To program the key of the Mazda 3, you will need to insert the blank key into the corresponding slot: once the ignition is turned on, you can connect a diagnostic tool to the OBD port of the vehicle, located under the steering column. After the connection, you can select the specific model of the car and its version: then follow the instructions on the scanner to verify that the key is working correctly.

Posted on 20 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Mazda 3 after replacing the battery?
How do you program the key of the Mazda 3 after replacing the battery?
Mazda 3 (2019-2026 / MK 4, BP) If the battery of your car key/remote runs out, it can happen, including the Mazda 3 mentioned here. In case this causes the decoding, you must remed…
How to Program the Key for a Mazda 3?
How to Program the Key for a Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) To program the key for a Mazda 3, insert the key into the ignition switch: once the key is inserted, connect a diagnostic tool to the vehicle's OBD p…
How do you program the key for the Mazda 3?
How do you program the key for the Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) If you ever need a second key for your Mazda 3, know that you can easily program it yourself in a short amount of time. Here is a video that explains…

    Frequently Asked Questions

    • Mazda 3 2019-2026 - What does the wrench light on the Mazda 3 indicate? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos