Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Airbag Cable Connector

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

First, locate the connectors attached to the cables that need replacing. Take the new connector and open it using a screwdriver.

Pry it open and remove the yellow part of the connector. Still using a screwdriver, unlock the side of the connector to open it and position the appropriate cables.

Before doing this, replace the piece at the end of the cables using a knife and pliers. Finally, place the cables into the connector and reassemble it. Take the new airbag and connect the cables to it. Reposition the new airbag in its place.

The maintenance operation shown in the images is performed on a Mazda 3.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to disassemble the steering wheel airbag of the Mazda 3
How to disassemble the steering wheel airbag of the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Disassembling the steering wheel airbag on a 2012 Mazda three is a simple and quick operation to be carried out independently. We begin the disassemb…
How to disassemble the steering wheel airbag of the 2012 Mazda 3
How to disassemble the steering wheel airbag of the 2012 Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today we will explain how to disassemble the steering wheel airbag of the Mazda 3 MK2 model on your own. Before performing this simple operation, we …
Instructions for Removing the Driver's Airbag
Instructions for Removing the Driver's Airbag
Mazda 3 (2009-2013 / BL, MK 2) In the event of a frontal collision resulting in the deployment of the driver's airbag, it must be removed from the steering wheel to replace it with…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos