Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel airbag of the 2012 Mazda 3

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

Today we will explain how to disassemble the steering wheel airbag of the Mazda 3 MK2 model on your own. Before performing this simple operation, we recommend disconnecting the vehicle's battery to prevent the airbag from activating during removal and damaging the car and the person performing the procedure.

We remove the plastic side covers of the steering wheel to access the screws.

Using a socket wrench with a 10 mm insert, we unscrew the screws and remove the central body of the steering wheel. Disconnect the connector from the airbag to remove it from the steering wheel.

The steps to assemble the airbag are the same but performed in reverse.


Posted on 9 August 2025 by ScegliAuto


Related tutorials

How to disassemble the steering wheel airbag of the Mazda 3
How to disassemble the steering wheel airbag of the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Disassembling the steering wheel airbag on a 2012 Mazda three is a simple and quick operation to be carried out independently. We begin the disassemb…
How to Remove the Steering Wheel from a Mazda 3 MK1
How to Remove the Steering Wheel from a Mazda 3 MK1
Mazda 3 (2003-2009 / BK, MK 1) In this video tutorial, you will see how to remove and replace the steering wheel, along with its airbag, from the first series Mazda 3 in simple and…
Instructions for Removing the Driver's Airbag
Instructions for Removing the Driver's Airbag
Mazda 3 (2009-2013 / BL, MK 2) In the event of a frontal collision resulting in the deployment of the driver's airbag, it must be removed from the steering wheel to replace it with…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos