Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace a headlight bulb on Mazda 3

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Headlight bulb
Operation: How to replace a headlight bulb on Mazda 3

Do you want to change the headlight bulbs of a Mazda 3 but have no idea how to do it? Let's see how to proceed in the demonstration video. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We remove the inspection caps of the headlights (located in the rear part of the headlights), we will find the bulbs with the metal hooks, we take out the plastic lamp holders from the headlight and we go to extract the damaged bulb. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. Finally we close the lighthouse with the inspection cap. We test the correct functioning of the lights.


Posted on 4 October 2023 by ScegliAuto



Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the headlight bulb, it is first necessary to remove the plastic covers right above the headlight in order to access the bulb holder. Then
Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To be able to replace the headlight bulb, open the hood and remove the triangular-shaped plastic cover located just above the headlight. At this poin
Replacement of the front turn signal bulb of the Mazda 3.
Mazda 3 (2009-2013 / MK 2, BL) Today in this guide, we will see the instructions that will allow us to disassemble and replace the front turn signal bulb of the Mazda 3. First, let

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos