Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlamp Bulb Replacement

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb, first remove the plastic covers located directly above the headlamp to access the bulb holder. Disconnect the power connector, remove the rubber cover, unclip the bulb retaining spring, and replace it with the new bulb, taking care not to touch the glass with your fingers.

If you decide to install a xenon effect bulb, it is advisable to replace it in the other headlamp as well, repeating the same procedure. New bulbs will give the vehicle a more modern and appealing style.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Mazda 3
How to Replace the Front Headlamp Bulb on the Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) Today, you will learn how to replace the front headlamp bulb on a Mazda 3. To replace the bulb, open the front bonnet of the vehicle and disconnect t…
How to Replace the Front Headlight Bulb on the 2022 Mazda 3
How to Replace the Front Headlight Bulb on the 2022 Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) The steps to replace the front headlight bulb on the 2022 Mazda 3 are: - open the bonnet by pulling the lever under the steering wheel; - disconnect …
Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Mazda 3 (2003-2009 / BK, MK 1) To replace the front headlight bulb, open the bonnet and remove the triangular plastic cover located just above the headlight. At this point, disconn…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos