Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Headlight bulb replacement

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Headlight bulb
Operation: Headlight bulb replacement

In order to replace the bulb it is necessary to remove the headlight and then unhook the front bumper to access the fixing pins: one is located at the lower left corner (looking from the front), one at the lower right corner and two others on the grille clapper. Once all the pins have been unscrewed, the headlight can be removed from its seat by pulling it forward and replacing the bulb. During these operations, be careful not to scratch the bodywork: in this regard it is advisable to completely disassemble the bumper.


Posted on 18 July 2023 by ScegliAuto



Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the headlight bulb, it is first necessary to remove the plastic covers right above the headlight in order to access the bulb holder. Then
Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To be able to replace the headlight bulb, open the hood and remove the triangular-shaped plastic cover located just above the headlight. At this poin
Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the headlight bulb, first remove the plastic cover between the fuse keypad and the engine cover. At this point, unhook the socket connecte

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos