Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper Grille of a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Grille

See other generations:
Video tutorial

Do you want to replace the front bumper of a Mazda 6? Let's see how to proceed. Lift the bonnet and secure it. Using a plastic spatula or screwdriver, detach the rivets securing the bumper at the top as shown in the video.

Once this is done, unscrew the bolts of the lower splash guard using a socket wrench. Remove the rivets with the screwdriver located on the wheel splash guards and finally remove the bolts at the bottom of the bumper.

Pull the bumper away from the body of the vehicle. Now, remove the grille from the inside of the bumper and fit the new piece.

To proceed with the assembly, secure the bumper as shown in the video and tighten all screws and rivets around the splash guard and its perimeter.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Bumper Grille
Mazda 6 (2002-2008 / GG, MK 1) This is a somewhat tricky operation but can save you money spent on a body shop for a quick job. First, remove the bumper by unscrewing all the screw…
Removing the Rear Bumper
Removing the Rear Bumper
Mazda 6 (2002-2008 / GG, MK 1) Open the rear hatch; unclip the retaining clips that connect the wheel arches to the bumper edge; unscrew the bumper fixing screw to the rear wing (l…
Headlight Bulb Replacement on Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) To change the front bulbs on a Mazda 6, start by unscrewing the screws present in the wheel arch on the side of the affected headlamp. Then move to t…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos