Headlight Bulb Replacement on Mazda 6

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Headlight bulb

To change the front bulbs on a Mazda 6, start by unscrewing the screws present in the wheel arch on the side of the affected headlamp. Then move to the lower part of the front bumper and unscrew the screws present here. Once done, you will have access to any bulb: this is because, on the Mazda 6, you can only reach them from below. Disconnect the connector of the affected bulb and, by pulling it, the bulb will come out as well. Remove it and insert the new one. The procedure is the same for all front headlight bulbs. Proceed in reverse for complete reassembly.

Updated on 4 April 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Light Bulb - Maintenance and repair on other vehicles

Headlight Bulb - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Front Bumper - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!

by ScegliAuto

Headlight Bulb Replacement on Mazda 6

Related tutorials

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

More videos