Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. 6
  6. : Mazda 6 headlight xenon bulb replacement

Mazda 6 - Video tutorial

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Headlight bulb
Operation: Mazda 6 headlight xenon bulb replacement

In this video tutorial we will see how to remove the headlight bulb of a Mazda 6. The bulb is located behind the front wheel so it is better to disconnect the battery poles in order to work safely, talking about the xenon lamp. The first thing to do is to unscrew the screws of the wheel mudguard in order to move it away or unhook it: at this point we are going to remove the cap of the lamp; we disconnect the electrical connector and go to replace the xenon bulb. Now we can go and reassemble everything remembering to reconnect the battery poles and, therefore, check the operation of the light bulb!


Posted on 13 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos