Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Battery

To replace the battery on this vehicle yourself, refer to the instructions below and the video. First, open the bonnet and locate the battery, which is situated at the top of the compartment under the windscreen. Disconnect the negative terminal first, followed by the positive terminal. Using a socket spanner, remove the nuts securing the upper plate. This allows you to extract the battery from its housing and position the new one. Reconnect the positive terminal first, then the negative terminal, and reattach the nuts securing the upper plate.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Mazda 6
How to Replace the Remote Battery on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, you will see how to replace the remote battery on a Mazda 6, a very simple and quick operation. To do this, you will need a small f…
How to Replace the Battery on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) To replace the battery on a Mazda 6, open the bonnet to access the components inside the engine bay: the battery is located on the right side, next t…
How to replace the remote battery on the Mazda 6 MK3
How to replace the remote battery on the Mazda 6 MK3
Mazda 6 (2012-2024 / GJ, MK 3) In this brief guide, discover how to disassemble and replace the battery in the electronic key fob for the Mazda 6 third generation by following thes…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos