Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. 6
  6. : How do you replace the Mazda 6 battery?

Mazda 6 - Video tutorial

Model: Mazda 6 MK 3, GJ - Years 2012-2023
Part: Battery
Operation: How do you replace the Mazda 6 battery?

To be able to replace the battery of the Mazda 6 you have to go and open the bonnet so that you can have access to the components located inside the engine compartment: the battery will be found on the right side of the latter, immediately next to the engine block. Once identified, it will be necessary to disconnect its power cables and loosen its fixing bolts; in this way the device can be extracted from inside its housing, so that it can be replaced with a new spare part. After the replacement it will be possible to start the car, making sure that everything works correctly.


Posted on 21 December 2022 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos