Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : Mazda 6 headlight bulb replacement

Mazda 6 - Video tutorial

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Headlight bulb
Operation: Mazda 6 headlight bulb replacement

In this video tutorial we will see how to replace the halogen / xenon headlight bulb of a Mazda 6. To do this we shouldn't have to disassemble the headlight or even get there from under the bonnet: we will have to get there from the front wheel. First we go to unscrew the screws of the wheel mudguard and remove it: at this point we would have access to the rear part of the headlight so we disconnect the bulb connector and remove the lamp. Use only original and good quality bulbs. Once replaced we also reassemble the mudguard by tightening all its screws!


Posted on 13 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos