Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Headlight bulb

Mazda 6 - Headlight bulb

Mazda 6 (2012-2023 / MK 3, GJ)
How to replace the front headlight bulb of the Mazda 6
Today we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Mazda 6, in simple steps. First, we open the hood of …read all…
Posted on 14 April 2024 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Replacement headlight bulbs on Mazda 6
To change the front bulbs on Mazda 6 you have to start by unscrewing the screws in the wheel arch from the side of the light concerned. Then go to the lower …read all…
Posted on 9 January 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Mazda 6 headlight xenon bulb replacement
In this video tutorial we will see how to remove the headlight bulb of a Mazda 6. The bulb is located behind the front wheel so it is better to disconnect the …read all…
Posted on 13 December 2023 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Mazda 6 headlight bulb replacement
In this video tutorial we will see how to replace the halogen / xenon headlight bulb of a Mazda 6. To do this we shouldn't have to disassemble the headlight or …read all…
Posted on 13 December 2023 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Mazda 6 headlight bulb replacement
Are the Mazda 6 headlight bulbs burned out? Let's see how they replace each other. We open the front stone guard, pulling the lever located at the bottom right …read all…
Posted on 6 December 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
How to change the light bulb on a mazda
Do you want to change a light bulb in your car and don't know how? In this video we will see how to do it together. For our safety and for the car we …read all…
Posted on 26 September 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Headlight bulb replacement
To replace the bulbs it is necessary to completely remove the front wheel to access the front lights. Unscrew the sealing screws under the fender and those …read all…
Posted on 17 July 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Headlight bulb replacement
To access the headlight bulb it is necessary to remove the wheel and the relative plastic wheel arch: once removed, it is possible to remove the protective cap …read all…
Posted on 12 July 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos