Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Interior lights ceiling light bulb

Mazda 6 - Interior lights ceiling light bulb

Mazda 6 (2002-2008 / MK 1, GG)
How do you replace the interior light bulb of the Mazda 6?
To replace the interior light bulb of the Mazda 6, you need to loosen the screws that secure the ceiling light in the central upper part of the car's ceiling. …read all…
Posted on 5 January 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Interior light bulb replacement
To access the passenger compartment courtesy light, open the glasses holder located above the interior rear-view mirror. We will find, in the upper part, two …read all…
Posted on 20 July 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos