Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : V-belt

Mazda 6 - V-belt

V-belt Mazda 6 (2012-2024 / gj, mk 3)

Mazda 6 (2012-2024 / GJ, MK 3)
How to Replace the Auxiliary Belt in the Mazda 6?
In this tutorial, you will see how to replace the auxiliary belt in the Mazda 6, a very simple and quick operation. First, ensure that the engine is completely …Read all…
Posted on 6 June 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacement of the V-belt
This video tutorial shows the procedure to remove and replace the worn V-belt of a Mazda 6. To gain better access to the belt, you need to remove the inner …Read all…
Posted on 16 February 2026 by ScegliAuto

V-belt Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2012-2024 / GJ, MK 3)
How to Replace the Auxiliary Belt in the Mazda 6?
In this tutorial, you will see how to replace the auxiliary belt in the Mazda 6, a very simple and quick operation. First, ensure that the engine is completely …Read all…
Posted on 6 June 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacement of the V-belt
This video tutorial shows the procedure to remove and replace the worn V-belt of a Mazda 6. To gain better access to the belt, you need to remove the inner …Read all…
Posted on 16 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos