Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Wheel

Mazda 6 - Wheel

Wheel Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
How to Work on the Anti-Vibration Links of a Front Wheel on a Mazda 6
To properly work on the anti-vibration links of a front wheel on a Mazda 6, first remove the entire tyre. This can be done easily with a suitable socket to …Read all…
Posted on 11 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace a Tyre on a Mazda 6
In this video, we will see how to replace a tyre on a Mazda 6. The first step: open the boot by pressing the button at the bottom left of the dashboard. In the …Read all…
Posted on 9 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Remove and Reinstall the Rear Wheel Support Plates
To remove and reinstall the rear wheel support plates, first lift the car on a ramp. Then, using a 12 mm socket, unscrew the bolts securing the wheel to remove …Read all…
Posted on 8 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Badge on Your Car's Alloy Wheels
Do you want to change the badge on your alloy wheels? We will show you how to do it with a detailed video. It is very simple. First, remove the wheel by …Read all…
Posted on 7 March 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos