Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Control arm

Mazda 6 - Control arm

Control Arm Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Front Control Arm on a Mazda 6
In this video, see how to remove the front control arm from a Mazda 6. First, place the car on a column lift and loosen the wheel bolts with a telescopic …Read all…
Posted on 10 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Wishbone on a Mazda 6
In this video, see how to work on a Mazda 6 by removing a wishbone. Position the car on a column lift, loosen the bolts with a telescopic spanner, and raise it …Read all…
Posted on 10 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Front Wishbone Replacement
First, position your vehicle on appropriate jack stands to carry out the operation. Remove the wheel and lift your vehicle. Then, remove the brake assembly, …Read all…
Posted on 8 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacement and Maintenance of the Control Arm
To perform this operation, lift your vehicle to access its underside. If you do not have a ramp, it is sufficient to place your vehicle on axle stands. Now, …Read all…
Posted on 8 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Change the Control Arm on a Mazda 6
As you may already know, cars can start to lose performance over time, especially the control arms. But don't worry, in this video, we will see how to change …Read all…
Posted on 7 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Wishbone on a Mazda 6
Hello, in this video you will see how to replace the wishbone on a Mazda 6. Start by removing the wheel on the affected side once it is raised on the ramp, to …Read all…
Posted on 7 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Suspension Arm of the Car
The suspension arm serves to connect the chassis to the struts. If it deforms or wears out, it will need to be replaced as a faulty arm can lead to a dangerous …Read all…
Posted on 4 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Suspension Arm of Your Car
The suspension arm of the car connects the chassis to the struts. When it deforms or wears out, it can be dangerous as it may lead to a hazardous loss of …Read all…
Posted on 3 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Suspension Wishbone Replacement
If you hear noise from the front suspension, especially when driving on uneven surfaces, it is very likely that the suspension wishbone has been damaged along …Read all…
Posted on 28 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Front Drop Link Replacement
The front stabiliser bar is connected to the suspension wishbone via the so-called drop link, which is a rod equipped with a spherical joint attached to the …Read all…
Posted on 27 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Suspension Arm
The first step is to remove the wheel: this will provide access to the double wishbone. Then, undo the lower bolt of the double wishbone. Under the bonnet, …Read all…
Posted on 14 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Upper Steering Arm and the Wishbone
This tutorial demonstrates the disassembly and replacement of the upper front control arm on a Mazda 6 (the same procedure applies to the Ford Fusion saloon). …Read all…
Posted on 13 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos