Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wishbone on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Control arm

In this video, see how to work on a Mazda 6 by removing a wishbone. Position the car on a column lift, loosen the bolts with a telescopic spanner, and raise it to a comfortable working height. Unscrew the bolts and remove the wheel. Then, unscrew the wishbone tightening bolt with a socket spanner and remove the bolt from the other end of the wishbone. Replace the faulty wishbone with a new one. For reassembly, screw the wishbone to both ends with the fixing bolts and remount the wheel. Remember to apply the correct torque to the wishbone by tightening the central bolts.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) .. Hello, in this video you will see how to replace the wishbone on a Mazda 6. Start by removing the wheel on the affected side once it is.. …
Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to remove the front control arm from a Mazda 6. First, place the car on a column lift and loosen the wheel bolts with a telesc…
Mazda 6 (2002-2008 / GG, MK 1) The suspension arm serves to connect the chassis to the struts. If it deforms or wears out, it will need to be replaced as a faulty arm can lead to a…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos