Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Control arm

See other generations:
Video tutorial

Hello, in this video you will see how to replace the wishbone on a Mazda 6. Start by removing the wheel on the affected side once it is raised on the ramp, to work more comfortably. Using a spanner, remove the bolt behind the brake discs.

Continue by removing the tie rod, and with the help of a hammer and chisel, tap on the pin that partially secures the wishbone with the tie rod, and slightly pull it out to better unscrew the pin. Once extracted, you can unscrew the central bolt of the tie rod to completely remove the wishbone.

Then take the new part to replace and reassemble everything.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the Wishbone on a Mazda 6
How to Replace the Wishbone on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to work on a Mazda 6 by removing a wishbone. Position the car on a column lift, loosen the bolts with a telescopic spanner, an…
How to Replace the Front Control Arm on a Mazda 6
How to Replace the Front Control Arm on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to remove the front control arm from a Mazda 6. First, place the car on a column lift and loosen the wheel bolts with a telesc…
How to Change the Control Arm on a Mazda 6
How to Change the Control Arm on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) As you may already know, cars can start to lose performance over time, especially the control arms. But don't worry, in this video, we will see how t…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos