Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Tyre on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Wheel

See other generations:
Video tutorial

In this video, we will see how to replace a tyre on a Mazda 6. The first step: open the boot by pressing the button at the bottom left of the dashboard. In the boot, you will find the jack, the spare wheel, the jack handle, and the telescopic wrench.

Assemble the jack and position it under the vehicle's jacking point. Then, loosen the wheel nuts with the telescopic wrench.

Once the nuts are loosened, lift the car with the jack and remove the wheel, placing it under the chassis for safety. Install the spare wheel onto the hub and tighten the nuts.

Finally, remove the wheel from under the chassis and secure the spare wheel.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

…
Mazda 6 GH: how to reset the TPMS.
Mazda 6 GH: how to reset the TPMS.
Mazda 6 (2008-2012 / MK 2, GH) To reset the TPMS on the Mazda 6 GH, safely park the car, turn on the ignition without starting the engine, and prepare a TPMS sensor programming too…
How to Work on the Anti-Vibration Links of a Front Wheel on a Mazda 6
How to Work on the Anti-Vibration Links of a Front Wheel on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To properly work on the anti-vibration links of a front wheel on a Mazda 6, first remove the entire tyre. This can be done easily with a suitable soc…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos