Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Indicator Lever

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Dashboard

Disconnect the battery cables to protect the electronic components. Next, unscrew the bolts securing the steering wheel to remove the central part where the airbag is located. Disconnect the connectors and remove the airbag. Now, unscrew the central bolt on the steering wheel to remove the remaining part. To remove the steering column, take out the bolts located at the bottom. You can now pull off the two covers of the steering column, allowing you to unscrew the screws securing the levers for replacement, and you're done!

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Car Spark Plugs
How to Replace Car Spark Plugs
Mazda 6 (2002-2008 / GG, MK 1) Replacing the spark plugs is something you can do yourself if you have good manual skills. Worn spark plugs can lead to problems such as exhaust smok…
Replacement and Maintenance of the Control Arm
Replacement and Maintenance of the Control Arm
Mazda 6 (2002-2008 / GG, MK 1) To perform this operation, lift your vehicle to access its underside. If you do not have a ramp, it is sufficient to place your vehicle on axle stand…
Replacement of the cabin air filter for the Mazda 6.
Replacement of the cabin air filter for the Mazda 6.
Mazda 6 (2012-2024 / GJ, MK 3) In a few simple steps, we will discover the instructions on how to remove and replace the cabin air filter or pollen filter of the Mazda 6. First, le…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos