Do it yourself
Frequently asked questions about cars and motorcycles

Replacement and Maintenance of the Control Arm

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Control arm

See other generations:
Video tutorial

To perform this operation, lift your vehicle to access its underside. If you do not have a ramp, it is sufficient to place your vehicle on axle stands.

Now, unscrew the bolt indicated in the video. If the bolt is stuck, it may be necessary to cut it completely.

Next, remove the bolt that secures the control arm on the other side and then completely remove the control arm. Proceed with the replacement and reassembly by following the steps in reverse, and you're done!


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to work on a Mazda 6 by removing a wishbone. Position the car on a column lift, loosen the bolts with a telescopic spanner, an…
Mazda 6 (2002-2008 / GG, MK 1) If you hear noise from the front suspension, especially when driving on uneven surfaces, it is very likely that the suspension wishbone has been dama…
Mazda 6 (2002-2008 / GG, MK 1) First, position your vehicle on appropriate jack stands to carry out the operation. Remove the wheel and lift your vehicle. Then, remove the brake as…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos