Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter for the Mazda 6.

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

In a few simple steps, we will discover the instructions on how to remove and replace the cabin air filter or pollen filter of the Mazda 6. First, let's open the front passenger side door and begin to unhook our glove compartment to lower it. Then, we remove the pollen filter cartridge located inside, as shown in the video.

At this point, let's clean the inside of the filter box from any residual dirt, and then install the new cabin air filter in the correct direction.

Finally, we reassemble the glove compartment onto the dashboard!


Posted on 1 January 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Mazda 6
How to replace the cabin air filter of the Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Replacing the cabin air filter on a Mazda 6 model 2 is a simple and quick operation that can be done independently, thanks to our short video tutoria…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mazda 6 (2008-2012 / MK 2, GH) The cabin air filter is located on the passenger side, just behind the glove compartment. Open the glove compartment, unclip the side stop bracket by…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mazda 6 (2002-2008 / GG, MK 1) The cabin air filter is located on the passenger side, behind the glove compartment: open the glove compartment door, disengage the end stop cable, a…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos