Do it yourself
Frequently asked questions about cars and motorcycles

Engine Air Filter Replacement

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Air filter

Open the front bonnet and locate the engine air filter housing: it is situated at the front right (when facing the vehicle) just in front of the battery. Release the securing clips of the cover, disconnect the mass air sensor connector, and lift to extract the old filter. Ensure there are no residues inside the filter housing (remove any with a vacuum cleaner or compressed air, taking care not to let them enter the intake duct) and insert the new filter; reattach the securing clips and the sensor connector.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda 6 (2008-2012 / GH, MK 2) Replacing the cabin air filter on a Mazda 6 model 2 is a simple and quick operation that can be done independently, thanks to our short video tutoria…
Mazda 6 (2008-2012 / GH, MK 2) The cabin air filter is located on the passenger side, just behind the glove compartment. Open the glove compartment, unclip the side stop bracket by…
Mazda 6 (2002-2008 / GG, MK 1) Need to replace the pollen filter on a Mazda 6? This is a very simple task; let's look at how to remove the filter. Open the glove compartment and de…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos