Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Exploded Steering Wheel Airbag

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Airbag

See other generations:
Video tutorial

If the airbag has exploded, it is necessary to replace it. First, deactivate the airbag by disconnecting the negative terminal of the battery. Remove the plastic covers around the steering column, then begin unscrewing the retaining screws of the airbag module, accessible through the holes on the sides of the steering column using a ratchet spanner.

Loosen the screws and carefully pull the airbag cover away, disengaging the plastic clips. Once the airbag is removed, carefully disconnect the two connectors located at the back by releasing the small plastic tabs with a tool.

Be careful not to drop the new airbag module, do not place it near intense heat sources, do not carry it away, do not shake or hit it, as it may explode.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel with Airbag from a Mazda 6
How to Remove the Steering Wheel with Airbag from a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) How do you remove the steering wheel from a Mazda 6? First, disconnect the battery cables. Use a socket to unscrew the fastening screws of the side a…
How to Remove the Steering Wheel Airbag
How to Remove the Steering Wheel Airbag
Mazda 6 (2002-2008 / GG, MK 1) To remove the steering wheel airbag, you will need 8mm and 10mm sockets, retaining clips and extensions, a flathead screwdriver, and a torque wrench.…
Replacing the Indicator Lever
Replacing the Indicator Lever
Mazda 6 (2002-2008 / GG, MK 1) Disconnect the battery cables to protect the electronic components. Next, unscrew the bolts securing the steering wheel to remove the central part wh…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos