Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Work on the Anti-Vibration Links of a Front Wheel on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Wheel

See other generations:
Video tutorial

To properly work on the anti-vibration links of a front wheel on a Mazda 6, first remove the entire tyre. This can be done easily with a suitable socket to unscrew the bolts holding it in place.

Next, use the same socket to unscrew the support that holds the disc onto which the wheel is mounted, which will be the focus of the work. No specific knowledge is required for these tasks, just the right tools and a good amount of effort.

It is advisable to wear gloves to protect your hands.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulb on Mazda 6
Replacing Front Headlamp Bulb on Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Are the front headlamp bulbs on your Mazda 6 blown? Here’s how to replace them. Open the front splash guard by pulling the lever located at the botto…
How to Remove the Wheel Bearing of a Mazda 6
How to Remove the Wheel Bearing of a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to remove the wheel bearing from a Mazda 6. First, position your car on a column lift, loosen the bolts with a telescopic span…
How to Replace the Wishbone on a Mazda 6
How to Replace the Wishbone on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, see how to work on a Mazda 6 by removing a wishbone. Position the car on a column lift, loosen the bolts with a telescopic spanner, an…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos