Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handle on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

Removing a handle from your car may seem difficult, but it's quite simple. First, use a plastic spatula to remove the speaker cover located at the right corner of the door with the attached cable.

Start detaching the window lift and lock controls from the door panel using the spatula, focusing on the edges of each plastic piece. Always remember to disconnect the power connectors.

Unscrew the screws of the handle and all those around the perimeter of the trim. After removing the panel, disconnect the cables.

With the panel off, simply remove the door handle and fit the new one. Reassemble the pieces in reverse order to how you disassembled them.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove a Door Handle on a Mazda 6
How to Remove a Door Handle on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this guide, you will see how simple it is to remove the external handle on a Mazda 6 door. To start, take a plastic spatula and remove the switch …
Replace the Door Lock on the Mazda 6
Replace the Door Lock on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the door lock on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Remove the entire door panel, taking care not to damage th…
How to remove the driver side air vent on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Do you want to replace the side air vents on a Mazda 6? Remove the vents for replacement. Pry at the top and bottom with the levers (as shown in the …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos