Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver side air vent on the Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Air vents

Do you want to replace the side air vents on a Mazda 6? Remove the vents for replacement. Pry at the top and bottom with the levers (as shown in the video), and detach the chrome frame from above the air vent. Disconnect the air vent and extract it from the centre console. Once you have pulled the vent outwards, remove the piece. Install the new air vent inside the dashboard: push the vent until it is fully locked in place. Secure the cover frame and test the operation of the vent.

Updated on 3 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Cabin Fan on the Mazda 6
Replacing the Cabin Fan on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the cabin fan on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Open the passenger door and locate the cabin fan under the…
How to Remove and Install the Sensor on a Mazda 6
How to Remove and Install the Sensor on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) This video guide shows you how to maintain your Mazda 6. Pull the lever located at the bottom left of the driver’s side dashboard, lift the bonnet un…
Mazda 6 Driveshaft Replacement
Mazda 6 Driveshaft Replacement
Mazda 6 (2002-2008 / GG, MK 1) To replace the driveshaft on a Mazda 6, follow these steps: 1) Remove the wheel. 2) Lift the car with jacks. 3) Blocking the wheel with wheel chocks …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos