Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Air Vent on Mazda 3

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air vents

See other generations:
Video tutorial

Removing the air vent from the dashboard of the Mazda 3? Remove the vent using a pair of needle-nose pliers, here’s how. Release the metal clip located in the air vent and then detach it from inside the dashboard, prying between the vent and the plastic trim until the piece disconnects.

After detaching the air vents, install the new air vents in the dashboard (always use a non-scratch lever).

Reassemble the metal/plastic clip. Test the correct operation of the air vent.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Mazda 3 (2009-2013 / BL, MK 2) Using a plastic tool to avoid damaging the bodywork, lever out the air vent from the dashboard and remove it from its housing. Remove the lower panel…
Mazda 3 (2013-2019 / BM, BN, MK 3) In this new guide dedicated to those of you who own a third generation Mazda 3, we will help you to complete the replacement of the engine air filter…
Mazda 3 (2019-2026 / MK 4, BP) If it is time to replace the engine air filter on your fourth-generation Mazda 3, but you do not know how, this guide will assist you. Below, you wil…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos