Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker from Your Car

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Speaker

See other generations:
Video tutorial

Start by removing the plastic cover of the mirror by gently pulling it off to release it, and disconnect the connectors. Then lift the section of the electric window controls and, again, disconnect the connectors.

Next, move to the door handle, remove the cover that hides the screw, unscrew it, and remove the small plastic piece. Then unscrew the screws at the bottom left, and now pull the door panel to release the plastic clips.

Disconnect all the connectors, unscrew the bolts that hold the speaker, and disconnect the wires. You can now replace it with the new one. This is how to remove the speaker from your MAZDA 6.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Speakers
Replacement of Front Speakers
Mazda 6 (2008-2012 / MK 2, GH) Lower the door window and remove the screw located in the handle recess. Unscrew the various screws located on the sides. Use a plastic tool to pry b…
How to Remove the Door Panel and Speaker on a Mazda 6
How to Remove the Door Panel and Speaker on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) In this video, we will see how to remove the door panel and speaker from a Mazda 6: start by removing the panel corresponding to the external electri…
How to Remove the Handle on a Mazda 6
How to Remove the Handle on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Removing a handle from your car may seem difficult, but it's quite simple. First, use a plastic spatula to remove the speaker cover located at the ri…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos