Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Speaker

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Speaker

See other generations:
Video tutorial

First, open the door on the side where the replacement is needed. Using a plastic lever, lift and remove the triangular part located symmetrically to the external mirror.

Perform this operation carefully to avoid damaging the wires and connectors at the back of this panel. Once the connectors are disconnected, you can either replace the entire piece or try to remove the speaker and replace just that part.

Now, retrace your steps for reassembling the various components.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Speakers
Replacement of Front Speakers
Mazda 6 (2008-2012 / MK 2, GH) Lower the door window and remove the screw located in the handle recess. Unscrew the various screws located on the sides. Use a plastic tool to pry b…
How to Remove the Speaker from Your Car
How to Remove the Speaker from Your Car
Mazda 6 (2002-2008 / GG, MK 1) Start by removing the plastic cover of the mirror by gently pulling it off to release it, and disconnect the connectors. Then lift the section of the…
How to Remove the Door Panel and Speaker on a Mazda 6
How to Remove the Door Panel and Speaker on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) In this video, we will see how to remove the door panel and speaker from a Mazda 6: start by removing the panel corresponding to the external electri…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos