Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Loudspeaker

Mazda 6 - Loudspeaker

Mazda 6 (2008-2012 / GH, MK 2)
How to remove door panel and speaker on a Mazda 6
In this video we see how to remove the door panel and speaker from a Mazda 6: we start by removing the panel corresponding to the external electric mirror, …read all…
Posted on 11 March 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
How to disassemble the speaker of your car.
We start by removing the plastic cover of the mirror, gently pulling it to release it and detach the contacts. Then we lift the part of the controls of the …read all…
Posted on 27 September 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Front speaker replacement
As a first operation, open the door of the side affected by the replacement, with a plastic lever raised and remove the triangular part which is respectively …read all…
Posted on 23 September 2023 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Replacing the front speakers
Lower the door glass and unscrew the screw located in the opening handle compartment. Unscrew the various screws on the side. Use a plastic tool to pry between …read all…
Posted on 16 July 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos