Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Car stereo

Mazda 6 - Car stereo

Mazda 6 (2012-2023 / MK 3, GJ)
How to turn off the display of the Mazda 6
To turn off the display in the Mazda 6, you can follow these steps: Make sure the car is turned on and the infotainment system is active. Look for the power …read all…
Posted on 2 March 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Where is the car radio fuse of a Mazda 6 and how to replace it?
The car radio fuse of a Mazda 6 is together with the other fuses inside the fuse box. To replace it, we will have to start by opening the front hood of the …read all…
Posted on 1 January 2024 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Demonstration of how to remove the center console.
If you need any repairs or modifications to the car radio and / or center console, this video will help you in the disassembly phases. Start with the …read all…
Posted on 1 August 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Car radio disassembly instructions
In order to disassemble the original car radio, the first operation to be carried out is to remove the central tunnel lining: position the gear lever backwards …read all…
Posted on 15 July 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Disassembly of the car radio for repair
Given the delicacy of the work, it is advisable to carry out the operation for those with a little experience. Remove the gearbox cover and its plastic panel …read all…
Posted on 12 July 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos