Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Radio Fuse on a Mazda 6 and How to Replace It?

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Car stereo

The radio fuse on a Mazda 6 is located with the other fuses inside the fuse box. To replace it, start by opening the front bonnet of the car to gain the necessary access. Once the bonnet is open, you will notice the fuse box on the right side of the engine compartment. Proceed to unclip the clips that secure the cover of the fuse box. After that, you can remove the cover. This will give you access to the blown fuse, which you can then extract. Once you have removed the fuse, to install the new fuse and close everything up, simply reverse these steps, and you will have completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a 2007 Mazda 6 and Replace it with a Touchscreen Stereo
How to Remove the Radio from a 2007 Mazda 6 and Replace it with a Touchscreen Stereo
Mazda 6 (2002-2008 / GG, MK 1) To replace the radio with a touchscreen stereo in a 2007 Mazda 6, follow these steps. First, remove the entire plastic surround around the handbrake,…
Placement of the fuse box of the Mazda 6 MK2
Placement of the fuse box of the Mazda 6 MK2
Mazda 6 (2008-2012 / GH, MK 2) The cause of the interruption of the operation of one of the components of the electrical system may be the intervention of its protective fuse. In o…
Mazda 6 Fuse Diagram
Mazda 6 Fuse Diagram
Mazda 6 (2012-2024 / GJ, MK 3) This model from the Japanese manufacturer has two fuse boxes. The first is located in the cabin on the left side near the driver's door, while the se…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos