Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Side marker bulb

Mazda 6 - Side marker bulb

Side Marker Bulb Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
Replacing Indicator Bulbs
First, disconnect the battery connectors to protect all electrical components. Next, remove the screws securing the headlamp to the front bumper, as well as …Read all…
Posted on 6 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacing the Side Indicator Bulb
To easily remove the protective cap of the bulb holder for the left front headlamp, it is necessary to remove the air filter container: first disconnect the …Read all…
Posted on 11 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Open the Fuel Flap and Unscrew the Cap on a Hyundai Tucson

The instructions in this guide will show you how to refuel by opening the fuel flap and unscrewing the tank cap on a Hyundai Tucson. First, get into the vehicle and pull the fuel flap release lever located at the bottom, driver's side (next to the seat); then move to the outside and open the fuel flap, unscrewing the cap to refuel, as illustrated in the video. Finally, screw the cap back on until it clicks and close the fuel flap!

Watch the video!


by ScegliAuto

More videos