Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Front bumper

Mazda 6 - Front bumper

Front Bumper Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
How to Replace the Front Bumper on the Mazda 6?
In this tutorial, you will see how to replace the front bumper on the Mazda 6, a very simple and quick operation. First, open the bonnet, then using a …Read all…
Posted on 26 August 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Front Bumper Replacement
To carry out this simple replacement, follow the instructions in this easy and quick guide. Unscrew the screws located under the wing, specifically those …Read all…
Posted on 8 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Instructions for Removing the Front Bumper
Open the front bonnet; remove the push clips located along the edge of the bumper, specifically inside the wheel arches; then unclip those near the headlights …Read all…
Posted on 12 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos