Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on the Mazda 6?

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front bumper on the Mazda 6, a very simple and quick operation. First, open the bonnet, then using a cross-head screwdriver, unscrew the two screws located above the grille.

Continue by removing the clips inside the wheel arch and unscrew all the lower bolts with an 8 mm socket. At this point, grasp the bumper at one end, pull outward, and detach it from the frame.

To fit the replacement, simply follow the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper Grille of a Mazda 6
How to Remove the Front Bumper Grille of a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Do you want to replace the front bumper of a Mazda 6? Let's see how to proceed. Lift the bonnet and secure it. Using a plastic spatula or screwdriver…
Front Bumper Replacement
Front Bumper Replacement
Mazda 6 (2002-2008 / GG, MK 1) To carry out this simple replacement, follow the instructions in this easy and quick guide. Unscrew the screws located under the wing, specifically t…
Removing and Replacing the Front Headlights of the Mazda 6 MK2
Mazda 6 (2008-2012 / MK 2, GH) In this video tutorial, you will see how to remove and replace the front headlights of the second series Mazda 6, following these simple and quick st…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos