Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Replacement

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Front bumper

See other generations:
Video tutorial

To carry out this simple replacement, follow the instructions in this easy and quick guide. Unscrew the screws located under the wing, specifically those facing the front bumper, performing this operation on both sides.

Next, remove the screws that secure the bumper to the lower panel of your vehicle. Then, lift the bonnet and remove the screws located on the top of the bumper.

Once all screws are removed, you can easily extract the bumper and disconnect the plugs at the back.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper
Removing the Rear Bumper
Mazda 6 (2002-2008 / GG, MK 1) Open the rear hatch; unclip the retaining clips that connect the wheel arches to the bumper edge; unscrew the bumper fixing screw to the rear wing (l…
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Mazda 6 (2002-2008 / GG, MK 1) Open the front bonnet; remove the push clips located along the edge of the bumper, specifically inside the wheel arches; then unclip those near the h…
How to Remove the Front Bumper Grille of a Mazda 6
How to Remove the Front Bumper Grille of a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Do you want to replace the front bumper of a Mazda 6? Let's see how to proceed. Lift the bonnet and secure it. Using a plastic spatula or screwdriver…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos