Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Bumper

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Rear bumper

See other generations:
Video tutorial

Open the rear hatch; unclip the retaining clips that connect the wheel arches to the bumper edge; unscrew the bumper fixing screw to the rear wing (located right next to the front edge of the bumper) and detach the bumper from the wing by pulling it outwards.

From inside the boot, unclip the trim carpet to access the removal of the rear lights; once removed, take out the bumper fixing clips (one is a push-fit and the other is screwed); additional push-fit clips are located along the lower edge of the bumper.

At this point, the bumper can be removed.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) Open the front bonnet; remove the push clips located along the edge of the bumper, specifically inside the wheel arches; then unclip those near the h…
Mazda 6 (2008-2012 / MK 2, GH) The following steps will guide you in removing and replacing the rear bumper on a Mazda 6. First, open the boot lid and start unscrewing and removing…
Mazda 6 (2002-2008 / GG, MK 1) To carry out this simple replacement, follow the instructions in this easy and quick guide. Unscrew the screws located under the wing, specifically t…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos