Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Rear bumper

Mazda 6 - Rear bumper

Rear Bumper Mazda 6 (2008-2012 / gh, mk 2)

Mazda 6 (2008-2012 / GH, MK 2)
How to Remove the Rear Bumper on a Mazda 6?
In this tutorial, you will see how to remove the rear bumper on a Mazda 6, a very simple and quick operation. First, open the boot, then remove the caps …Read all…
Posted on 22 August 2026 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
How to Remove the Rear Bumper on a Mazda 6
The following steps will guide you in removing and replacing the rear bumper on a Mazda 6. First, open the boot lid and start unscrewing and removing the clips …Read all…
Posted on 14 July 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Removing the Rear Bumper
Open the rear hatch; unclip the retaining clips that connect the wheel arches to the bumper edge; unscrew the bumper fixing screw to the rear wing (located …Read all…
Posted on 11 February 2026 by ScegliAuto

Rear Bumper Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2008-2012 / GH, MK 2)
How to Remove the Rear Bumper on a Mazda 6?
In this tutorial, you will see how to remove the rear bumper on a Mazda 6, a very simple and quick operation. First, open the boot, then remove the caps …Read all…
Posted on 22 August 2026 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
How to Remove the Rear Bumper on a Mazda 6
The following steps will guide you in removing and replacing the rear bumper on a Mazda 6. First, open the boot lid and start unscrewing and removing the clips …Read all…
Posted on 14 July 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Removing the Rear Bumper
Open the rear hatch; unclip the retaining clips that connect the wheel arches to the bumper edge; unscrew the bumper fixing screw to the rear wing (located …Read all…
Posted on 11 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos