Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : -board computer

Mazda 6 - -board computer

Mazda 6 (2012-2023 / MK 3, GJ)
To reset the oil light on the Mazda 6 2021.
We return with a new guide dedicated to all of you owners of a 2021 Mazda 6 to help you correctly reset the engine oil light completely manually and without …read all…
Posted on 12 November 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos