Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Window motor

Mazda 6 - Window motor

Mazda 6 (2002-2008 / MK 1, GG)
How to replace the window motor on the Mazda 6
In this video we will see the main instructions to remove and replace the window lifter motor on the Mazda 6 first series, in simple steps. First we open the …read all…
Posted on 10 May 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
How to disassemble a Mazda6 window motor
Let's see in this video how to remove a window motor of your car. To begin with, let's get a plastic spatula and let's remove the frame around the door. We …read all…
Posted on 26 September 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos