Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle a Mazda6 Window Motor

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Power window motor

See other generations:
Video tutorial

In this video, we will see how to dismantle a window motor from your car. First, get a plastic spatula and remove the trim around the door. Extract the window control buttons and gently disconnect all the clips without breaking the plastic parts.

Unscrew the screws on the entire door panel, detach the various plastic rivets, then remove the door opening trim. Pull the door panel and disconnect the relevant power cables, being careful not to damage the parts.

Once the plastic panel is removed, secure the glass with tape, dismantle the door opening lever, and disconnect the relevant cables for the external mirror and speakers. Unscrew all the screws from the metal panel with a socket wrench.

Once removed, unscrew the window motor from the glass and the door with its respective rail. Ensure that the glass does not slide down into the door cavity.

Obtain the new window motor and screw it to the glass and the metal frame, position the glass cover panel, the door opening cable, screw everything back together, and reconnect all the power cables. Finally, reassemble the handle and the door panel, remembering all the associated screws.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator Motor on the Mazda 6
How to Replace the Window Regulator Motor on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, follow the main instructions to remove and replace the window regulator motor on the first series Mazda 6 in simple steps. First, open…
How to reset the maintenance lights on a Mazda Mazda6
How to reset the maintenance lights on a Mazda Mazda6
Mazda 6 (2012-2024 / GJ, MK 3) This guide shows how to reset the service lights on a 2012 Mazda 6 without using any diagnostic device. The procedure is performed directly from the …
Replacing the Window Switch Assembly on a Mazda 6
Replacing the Window Switch Assembly on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the window switch assembly on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Using a plastic trim tool, lever off the trim…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos